User manual – Goldmund MIMESIS 20.7 D/A Converter - 10 -
DIGITAL INPUTS/OUTPUTS CONFIGURATION:
• 2 switchable Digital Inputs, S/PDIF coaxial (RCA 75 Ohms) and AES/EBU balanced
(XLR 110 Ohms)
• 2 Digital Outputs, providing S/PDIF RCA coaxial and AES/EBU XLR balanced, with
separate driving circuits
ANALOG OUTPUTS:
• 1 x Analog RCA outputs
• 1 x XLR balanced analog outputs
D/A CONVERTER CIRCUIT:
• Goldmund ultra-linear phase proprietary circuitry enhanced Alize 7 with enhanced
dynamics
• Bandwidth: 20Hz-20kHz -0.2dB typical
• Typical non-linearity : below 1dB at -100dB
• Typical phase error between channels: < 0.5degrees
• Output voltage: 2Vrms unbalanced, 4Vrms balanced
FRONT PANEL CONTROLS:
• 1 key for Power ON/OFF
• Separate Led display for Power (red) and for digital signal locking (green)
REAR PANEL CONNECTORS AND CONTROLS:
• 1x analogue RCA output connector
• 1x analogue XLR output connector
• 1 set of digital input (1 x RCA SPDIF and 1 x XLR AES/EBU)
• 1 set of digital outputs (1x RCA SPDIF and 1x XLR AES/EBU)
• Input switch between SPDIF and AES
• Channel input switch