6.The Console (16) can be operated with four 1.5V “D” batteries (not included); alkaline batteries are recom- mended. IMPORTANT: If the exercise cycle has been exposed to cold temperatures, allow it to warm to room temperature before inserting batter- ies into the Console. If you do not do this, the console displays or other electronic components may become damaged. Press the tab on the battery cover and remove the battery cover. Insert four batter- ies into the console; make sure that the batteries are oriented as shown. Then, reattach the battery cover.
The Console (16) can also be operated with an optional power supply (not included). To purchase a power supply, call the telephone number on the front cover of this manual. To avoid damaging the console, use only a
7.Connect the console wire harness to the Upper Wire Harness (36). Insert the console wire harness into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Screws (57).
Attach the Bottle Holder (8) to the Upright (13) with two M4 x 22mm Screws (52).
6 |
16 |
Batteries |
Battery |
Cover |
7 |
|
|
| Console |
|
| Wire |
|
| Harness |
|
57 |
|
|
|
| 16 |
| 13 | 36 |
|
| |
8 | 52 |
|
8