Goldstar DH40, DH50, DH30 owner manual Operating Instructions, Features, Electrical requirements

Operating Instructions

Features

This section contains captioned illustrations of your appliance. Use the drawings to become familiar with all parts and features and what they look like.

	Humidity
Auto	Control
Shut-Off	Fan Speed
Light

ShutAuto	2
-Off
	1
	Off
Humidity

3	4		5
			6
			7
			8
	M	ax	9	High
Control			Fan	Speed Low

	Air Filter
	Cabinet
Bucket	Grille

Electrical requirements

OBSERVE ALL LOCAL CODES AND ORDINANCES. DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUND PRONG.

Electrical ground is required on this appliance.

A 115-volt 60 Hz, AC only, 15A fused and properly grounded electrical supply is required. A time delay fuse or time delay circuit breaker is recommended.

Use a dedicated circuit, serving only this appliance. Do not use an extension cord.

	3-prong
3-prong	grounding
	type wall
grounding
	receptacle
plug

Ground

Power prong supply

cord

Recommended grounding method

For your personal safety, this appliance must be grounded. This appliance has a power supply cord with a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating grounding type wall receptacle, grounded in accordance with the National Electrical Code (ANSI/NFPA 70) latest edition and all local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

5