FEATURES
•2000 display characters in a 8 x 8 dot format.
•18 MHz bandwidth, medium class, composite signal input.
•This monitor is compatible with a variety of home and personal computers
CONTROLS LOCATION
The
The input signal is input through the RCA jack connector.
The input signal is based on the composite level.
Figure 2 shows the monitor controls on the front and rear panels.
r--- \
[ | / t yLcPower | I n d i c a t o r | Video In | ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
| I |
|
|
| ||
| Contrast | B r i g h t n e s s P o w e r |
|
| H - Position H - Hold V - Sue Power Cord |
Figure 2, Monitor Controls
NOTE: Monitor cabinet not used on 6300T Models.
0 POWER (PUSH-ON)
Turn on the monitor by pressing the power switch. The power indicator lights when the power is ON. Always turn on the monitor before you turn on the computer.
To turn the power OFF, just press this switch again.
0 Brightness
Turn this knob clockwise to increase brightness.
0 Contrast
Turn this knob clockvvise to increase contrast.
0V-Size
Turn this knob to adjust the vertical size of the picture.
0 H-Hold
Turn this knob to stop horizontal rolling of the picture.
0 H-Position
Turn this knob clockwise to move the center of the picture to the right; turn the knob counterclockwise to move the center of the picture to the left.
0H-Size
Turn this knob to adjust the horizontal size of the picture.