Charging the battery

ØBefore you use the video camera for the first time, please fully charge the NP60 battery with battery cradle for at least three hours.

Battery Cradle

Charge by USB

Charge by Power

(USB port)

Adaptor (DC In port)

Loading the Battery into Battery cradle

Load NP60 battery into the battery cradle by following step:

Ø Face the battery up (with the charger’s graphic) side upward, then slide the battery into charge according to the

correct polarity marks. (+ or -). The caution LED (red) lights during charging.

(A) Charging it by USB cable

1.Connect the battery cradle and the computer with USB cable

2.It takes about three hours to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions. The caution LED (red) lights during charging and goes off after roughly 3 hours.

15