ADJUSTING AIRFLOW DIRECTION (CONT.)
Automatic Swing Airflow Direction
•Perform this function while the air conditioner is in operation.
•Press the SWING button on the remote control.
•To stop the function, press the SWING button again.
•Press AIR DIRECTION button to lock louver in desired position.
!CAUTION
•The AIR DIRECTION and SWING buttons will be disabled when the air condi- tioner is not in operation (including when the TIMER ON is set).
•Do not operate the air conditioner for long periods with the airflow direction set downward in cooling or dry mode. Otherwise, condensation may occur on the surface of the horizontal louver causing moisture to drop on to the floor or on furnishings.
•Do not move the horizontal louver manually. Always use the AIR DIRECTION or SWING button. If you move this louver manually, it may malfunction dur- ing operation. If the louver malfunctions, stop the air conditioner once and restart it.
•When the air conditioner is started immediately after it was stopped, the horizontal louver might not move for approximately 10 seconds.
•Open angle of the horizontal louver should not be set too small, as COOLING or HEATING performance may be impaired due to too restricted airflow area.
•Do not operate unit with horizontal louver in closed position.
•When the air conditioner is connected to power (initial power), the horizontal louver may generate a sound for 10 seconds; this is a normal operation.
9
