Goodmans Split System Air Conditioner, DSXC18 warranty Product Specifications

Product Specifications

Specifications

	DSXC18	DSXC18	DSXC18
	0361A	0481A	0601A
Cooling Capacity
Nominal Cooling (BTU/h)	35,000	47,000	57,000
Decibels	71	72	74
Compressor
RLA	15.3	21.2	27.1
LRA	83	104	152.9
Condenser Fan Motor
Horsepower (RPM)	⅓	⅓	⅓
FLA	2.80	2.80	2.80
Refrigeration System
Refrigerant Line Size¹
Liquid Line Size (“O.D.)	⅜"	⅜"	⅜"
Suction Line Size (“O.D.)	⅞"	1⅛"	1⅛"
Refrigerant Connection Size
Liquid Valve Size (“O.D.)	⅜"	⅜"	⅜"
Suction Valve Size (“O.D.)	⅞"	⅞"	⅞"
Valve Connection Type	Sweat	Sweat	Sweat
Refrigerant Charge	184	259	259
Expansion Device	TXV	TXV	TXV
Superheat at Service Valve	7-9°F	7-9°F	7-9°F
Subcooling at Service Valve	5-7°F	5-7°F	5-7°F
Electrical Data
Voltage-Phase-Hz	208/230-1-60	208/230-1-60	208/230-1-60
Minimum Circuit Ampacity ¹	21.9	29.3	36.7
Max. Overcurrent Protection ²	35	50	60
Min / Max Volts	197 / 253	197 / 253	197 / 253
Electrical Conduit Size	½" or ¾"	½" or ¾"	½" or ¾"
Equipment Weight (lbs)	250	305	316
Ship Weight (lbs)	272	327	338

¹Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes ² Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.

Notes

•Always check the S&R plate for electrical data on the unit being installed.

•Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.

•Unit is charged with refrigerant for 15’ of ⅜” liquid line. System charge must be ad- justed per Installation Instructions Final Charge Procedure.

•Installation of these units that require a TXV Kit to be installed on the indoor coil.

•PLEASE NOTE: the specified TXV is determined by the outdoor unit, not the indoor coil.

SS-DSXC18 www.goodmanmfg.com 3