Playing a DVD
1.Plug the unit into a standard 120V outlet, and turn the power on by moving the Power Switch into the ON position. If the internal battery is charged, the unit does not have to be plugged in.
2.Press the Open Button and load a DVD into the unit’s
3.If the DVD doesn’t start, switch the unit to DVD Mode by pressing and holding the
DVD/SD/USB Function Button.
4.Use the Directional Buttons to navigate through the DVD menu.
5.Press the Play Button or Enter Button to make selections in the DVD menu.
6.Press the Pause Button to pause a DVD during play.
7.Press the Previous & Next Buttons to skip backwards and forwards through DVD chapters.
8.Press the Menu Button to go back to the DVD’s main menu.
Programming a DVD
1.Insert a DVD into the unit. See the “Playing a DVD” operation on page 16.
2.After the DVD is inserted and loaded, press the Program Button on the remote control to display the Program Menu.
3.Use the Directional Buttons to move through the sixteen different program slots.
4.Highlight a slot and enter a Title (T) number and Chapter (C) number using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired titles and chapters are programmed.
5.Highlight the “Play” button, on screen, using the Directional Buttons, and press the Enter Button to begin playing the programmed titles and chapters.
|
|
| T R K 1 8 / 1 8 |
|
|
|
|
|
| 0 1 : 1 4 : 2 0 |
| |
| PROG |
|
|
|
|
|
|
|
|
| ||
|
| T | C |
| T | C |
| T | C |
| T | C |
1 | 5 | 9 | 13 | |||||||||
2 | 6 | 10 | 14 | |||||||||
3 | 7 | 11 | 15 | |||||||||
4 | 8 | 12 | 16 | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PLAY |
|
|
| CLEAR |
|
|
|
|
|
TFT
ON/OFF
DVD
TITLEAUDIO
PREV.NEXT
SETUP DISPLAY
PLAY/PAUSE DVD/SD/USB
OPEN
VOLUME
