GPX TD1510 manual Getting Started - Setting Up Your Television, Auto Scanning for Channels

GETTING STARTED - SETTING UP YOUR TELEVISION

Connecting a Cable or Satellite Receiver or RF Antenna

You will need: Coaxial Cable, an Over-the-Air or Standard Antenna.

Connect the antenna’s output to the TV Antenna Input on the television.

Power the television on and press the Source Button to switch to TV Mode.

Auto Scanning for Channels

After you have connected the television to a power source and an antenna or cable source, press the Power Button to turn the tv on.

Press the Source Button to switch to TV Mode.

Press the Menu Button to access the televisions preferences and setup menu.

Press the TV Navigation Buttons (▲/►/▼/◄/

Enter) to select the Channel preferences.

Adjust the Air/Cable setting to air if you have hooked up an antenna, or cable if you have hooked up a cable or satellite receiver.

Press the TV Navigation Buttons (▲/►/▼/◄/

Enter) to select Auto Scan.

Basic Features

Channel +/- Buttons

Press to adjust the channel of the television.

Volume +/- Buttons

Press to adjust the volume of the television.

Number Keypad

Enter in a number to go to that specific channel.

The number entered must match the channel number exactly.

Over-the-Air Antenna

Standard Antenna

Mute Button

Press to mute the television.

TV Menu Button

Press to access the TV’s preferences and setup menu.

TV Navigation Buttons (▲/►/▼/◄/Enter)

Press to navigate the TV’s on-screen menus.

6 GPX TD1510