Connecting Other Devices
(Computer, Optical Audio Output, and USB Thumb Drive)
Connecting a Computer
You will need: a PC with a VGA output, and a VGA cable. (not included)
1.Connect the computer’s VGA output to the VGA/ PC INPUT on the television.
2.Power the television on and press the SOURCE button to switch to the PC Mode.
3.Audio from the connected PC can be input to the television through the TV’s PC AUDIO INPUT by using a 3.5mm audio cable (not included).
Using the Optical Audio Output
You will need: a (home theater) with an Optical Audio Input and a Digital Optical Audio Cable (not included)
1.Connect the Digital Optical Audio Cable to the (home theater system) and the television.
2.Adjust the settings on your (home theater) to play audio from the connected Optical Audio Input.
Please note: home theater systems may label the Optical Audio Input source differently, such as “PCM”, or “Digital Audio Input”. Please consult your home theater system’s user manual in order to select the correct input source.
3.Audio from the television will now be played through the connected (home theater system).
VGA/PC INPUT and PC AUDIO INPUT 
OPTICAL AUDIO
OUTPUT
OPTICAL OUT
Connecting a USB Thumb Drive
1.Load a USB thumb drive into the USB PORT as shown in the image to the right.
OOPTICALUSB PORT
Using the Connected USB Thumb Drive
1.Follow the instructions for Connecting a USB thumb drive.
2.Press the SOURCE button to switch to Media mode.
3.Use the ARROW and ENTER buttons to select and play content from the connected USB thumb drive.
4.Press the EXIT button to return to the media menu.
The USB port can also be used to upgrade the televisions firmware. For detailed instructions and the latest software, go to www.gpx.com
Customer Support: | 11 |
