Step 2.

Snap handle and hinges together to lock. Be sure handle is locked into the plastic hinges.

Step 3.

Place cradle in hanger.

Be sure handle notches are seated in the hanger.

Hanger

Adjusting the Handle

To bring carrier handle from resting position into position for carrying or swinging, first set the carrier down. Then push down on center of handle, and rotate the handle forward until it clicks into the locked position.

Push down on center of handle

Notch

To return the handle to resting

Push down on center

Starting the Cradle

Step 1.

Place your child in the cradle.

Step 2.

Set the CONTROL switch between the low and center positions. Your cradle will swing properly only in the lower range.

Step 3.

Push ON/OFF switch to the “on” position.

Step 4.

PUSH CRADLE TO START. BE SURE YOU PUSH IT UP HIGH ENOUGH FOR THE MOTOR TO GET A GOOD START.

NOTE: Draping a small blanket over side of cradle will slow the swinging motion.

Using the Carrier

position, first set the carrier down. Then push down on center of handle, and rotate the handle backward until it clicks into place.

NOTE: It is normal for the handle to seem loose in the resting position.

Using the Tray

Unlatch the tray by squeezing the two latches under the tray at the same time, and lift up tray. Be careful not to let tray hit your baby when lifting or closing tray.

To latch tray, push down firmly.

Tray must be latched at all times when baby is in the swing.

of handle

Lift carrier in and out of swing.

Do not adjust the handle while carrier is on swing.

Different uses for infant carrier...

Cuddler

Carrier

Feeder

 

...or as a Rocker.

 

 

7

 

Adjusting the Stand

To change recline of the carrier, squeeze the adjustment wire and move to desired position.

To adjust for rocking, move the adjustment wire to the highest position.

Do not change recline with baby in carrier.

Be aware that infant move- ment or rocking may cause the carrier to move on a table.

8

Page 3 Page 5
Page 4
Image 4
Graco 1501 manual Adjusting the Handle, Starting the Cradle, Using the Carrier, Using the Tray, Adjusting the Stand
Page 3 Page 5

1501 specifications

The Graco 1501 is a highly regarded airless paint sprayer that has made a name for itself among professionals and DIY enthusiasts alike. Known for its reliability and robust performance, the Graco 1501 is designed to deliver a smooth, high-quality finish for various painting projects, from residential homes to large commercial buildings.

One of the standout features of the Graco 1501 is its powerful motor, which provides consistent pressure to ensure an even coat of paint without the need for thinning. This powerful engine is complemented by a Heavy-Duty pump that is capable of handling thick materials, making it an excellent choice for a range of coatings, including latex and oil-based paints, stains, and sealers.

The innovative Ultra-HEA technology featured in the Graco 1501 reduces overspray significantly, allowing users to achieve a refined finish while minimizing waste. This technology not only improves efficiency but also enhances control over the spray pattern, ensuring professional-quality results regardless of user experience.

Another characteristic that sets the Graco 1501 apart is its user-friendly design. The unit comes equipped with a lightweight and portable frame, making it easy to transport across various job sites. The spray gun features a comfortable grip and is designed for extended use, reducing fatigue during long painting sessions.

Additionally, the Graco 1501 boasts a convenient reverse-a-clean feature on its spray tip. This function allows users to easily clear any clogs by reversing the tip’s flow, saving time and improving workflow. The sprayer also includes a robust filter system that helps prevent debris from entering the paint, ensuring a high-quality finish and reducing maintenance needs.

With a maximum pressure of 3000 PSI, the Graco 1501 is suitable for both small and large projects. The adjustable pressure control allows users to customize the output according to their specific needs, providing versatility for various applications, from fine finish work to larger surface areas.

Overall, the Graco 1501 is a reliable and efficient airless paint sprayer that combines power, technology, and user-centric design. Its advanced features cater to both beginners and seasoned professionals, making it a valuable tool for achieving excellent results in any painting endeavor.
Top Page Image Contents