Graco 205148 important safety instructions

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

3:1 Ratio Bulldog®

Transfer Pump

With inductor, guide bars and release bar

Without inductor, guide bars and release bar300 psi (2.1 MPa, 21 bar) Maximum Working Pressure100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

Use with lubrication applications only! This pump is

designed to be used for pumping non-corrosive and

non-abrasive lubricants and greases only. Any other use of

the pump can cause unsafe operating conditions and result

in component rupture, fire or explosion, which can cause

serious bodily injury.

Priming Piston Hazard

This pump has a priming piston which extends below the

foot valve during operation. This piston could pinch or

amputate your fingers or hands as it moves up, into the cyl-

inder. To reduce the risk of injury, keep your fingers and

hands and all tools away from the priming piston during

operation and whenever the air and fluid pressure in the

pump is not fully relieved.

ti10550a