Operation

Pressure Relief Procedure

WARNING

PRESSURIZED EQUIPMENT HAZARD

The equipment stays pressurized until pressure is manually relieved. To reduce the risk of serious injury from pressurized fluid, accidental spray from the dispensing device, or splashing fluid, follow this procedure whenever you

DAre instructed to relieve pressure

DStop pumping

DCheck, clean, or service any system equipment

DInstall or clean fluid nozzles

1.Stop pumping, and shut off the air to the pump.

2.Relieve pressure in the surge suppressor as follows:

D For automatic surge suppressors, remove the air pressure gauge, and allow any residual air pressure to escape.

D For manual surge suppressors, adjust the regulator to relieve the air pressure by dialing down the pressure.

WARNING

TOXIC FLUID HAZARD Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DRead TOXIC FLUID HAZARD on page 3.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manu- als. Read the fluid and solvent manufacturer’s warnings.

WARNING

FIRE AND EXPLOSION HAZARD

Charge the surge suppressor with compressed air or nitrogen only. Do not

use oxygen.

Never pump flammable fluids with polypropylene units.

Charging the surge suppressor with oxygen or pumping flammable fluids with polypropylene units could cause a fire or an explosion.

Minimum and Maximum Operating Temperatures

Find the minimum and maximum operating tempera- tures for your surge suppressor unit in the list below. These temperature limits are stated at zero gauge pressure.

Automatic Husky 750

239095 10_ to 180_ F (–12_to 82_ C)

239096 32_ to 175_ F (0_ to 79_ C)

239121 40_ to 175_ F (4_ to 79_ C)

239122 32_ to 175_ F (0_ to 79_ C)

239123 40_ to 220_ F (4_ to 104_ C)

239124 –10_to 350_ F (–23_to 176_ C)

Automatic Husky 2000

239092 32_ to 175_ F (0_ to 79_ C)

239093 32_ to 175_ F (0_ to 79_ C)

239126 40_ to 175_ F (4_ to 79_ C)

239127 32_ to 175_ F (0_ to 79_ C)

239128 40_ to 175_ F (4_ to 79_ C)

Manual Husky 750

239090 10_ to 180_ F (–12_to 82_ C)

239091 32_ to 175_ F (0_ to 79_ C)

239129 40_ to 175_ F (4_ to 79_ C)

239130 32_ to 175_ F (0_ to 79_ C)

239131 40_ to 220_ F (4_ to 104_ C)

239132 –10_to 350_ F (–23_to 176_ C)

Manual Husky 2000

239087 32_ to 175_ F (0_ to 79_ C)

239088 32_ to 175_ F (0_ to 79_ C)

239134 40_ to 175_ F (4_ to 79_ C)

239135 32_ to 175_ F (0_ to 79_ C)

239136 40_ to 175_ F (4_ to 79_ C)

308703 7

Page 7
Image 7
Graco 239088, 239126, 239096 Operation, Pressure Relief Procedure, Minimum and Maximum Operating Temperatures, Use oxygen

239126, 239088, 239095, 239091, 239096 specifications

Graco offers a range of innovative paint sprayers designed to enhance the efficiency and quality of painting projects. Among its notable products are the Graco 239096, 239091, 239095, 239088, and 239126 models. Each of these sprayers comes equipped with unique features and advanced technologies, catering to both professional contractors and DIY enthusiasts.

The Graco 239096 is recognized for its compact design and portability, making it ideal for smaller job sites or projects requiring mobility. It features a powerful motor that facilitates consistent paint flow, allowing for a smooth and even application. The unit is also versatile, capable of spraying various materials, including stains and latex paints, showcasing its adaptability across different applications.

The Graco 239091 stands out with its high-efficiency airless technology, which ensures less overspray and reduced paint waste. This model is engineered to deliver a finely atomized spray pattern, resulting in professional-grade finishes. With its easy-to-use controls, operators can effortlessly adjust the pressure settings to match the specific requirements of each task, enhancing precision and control during painting.

Moving on to the Graco 239095, this sprayer is designed for high-volume projects, featuring a robust motor designed for demanding applications. Its durable construction ensures longevity while the built-in filter system helps keep the spray nozzle clean, reducing the downtime typically associated with maintenance. Its large capacity paint container allows for extended operation without frequent refills, making it an excellent choice for large-scale jobs.

The Graco 239088 model is particularly user-friendly, with an intuitive interface that simplifies operation even for first-time users. It includes a lightweight design for easy handling and transport, coupled with a comfortable grip that minimizes fatigue. This sprayer is perfect for fine-detail work and touch-ups, thanks to its adjustable spray width and pressure, which can be easily modified based on the project needs.

Lastly, the Graco 239126 is equipped with advanced technology that minimizes overspray while maximizing efficiency. This model features a reversible tip system that allows users to quickly clear clogs, ensuring a seamless painting experience. Its ergonomic design and built-in features make it suitable for both detailed work and larger applications, offering versatility that adapts to the user's needs.

In summary, the Graco paint sprayer lineup, including the 239096, 239091, 239095, 239088, and 239126, presents a variety of options tailored to enhance productivity and quality in painting applications. With their cutting-edge technology, user-friendly designs, and robust features, these models are ideal for anyone looking to achieve a professional finish.