Warnings
Install the Power CAN Cable
Non-IS Systems
1.Remove the user interface cable from J8 of the fluid control module and plug it into connector P3 of the USB module. See FIG. 2.
2.Connect Part No. 15V778 Cable (order separately) to J8 of the fluid control module and to connector P4 of the USB module.
3.Close the Control Box. Restore power.
4.See your ProMix 2KE Operation manual for instruc- tions on using the USB module.
USB Module
TI16580a
P4P3
Fluid Control Module
J8
TI16579a
FIG. 2. Install Part No. 15V778 Cable (Non-IS Systems)
IS Systems
1.Connect Part No. 15V782 Cable (order separately) to J2 of the alternator module and to connector P3 of the USB module. See FIG. 3.
2.Close the Control Box. Restore power.
3.See your ProMix 2KE Operation manual for instruc- tions on using the USB module.
To help prevent fire and explosion, do not connect, download, or remove the USB flash drive unless the unit is removed from the hazardous (explosive atmosphere) location. Never leave the USB flash drive in the USB port.
USB Module | Alternator Module |
TI16580a
P3
TI15710a
J2
FIG. 3. Install Part No. 15V782 Cable (IS Systems)
4 | 3A1333A |
