Solving Problems
DO NOT ATTEMPT TO MODIFY THE UNIT.
Any modifications to the transmitter and/or receiver can void the operator’s authority to operate the equipment.
Most problems have a simple solution.
First, check that:
•Power is turned ON for both units
•Both units are plugged in (or battery is fresh in Parent’s Unit)
•Electrical outlet works
•Units are set to same channel
•Volume is turned up on Parent’s Unit
•Parent’s Unit is in range of the Nursery Unit
No Sound
•Battery dead or weak — replace batteries or use AC adapter.
•Channel settings do not match — set both units to same channel.
•AC adapter not properly connected — check the connections.
•Nursery Unit covered or blocked — remove the obstruction.
Weak Sound
•Parent’s Unit too far from Nursery Unit — move closer.
•Large objects blocking the signal — try repositioning Nursery Unit.
•Check that antennas are vertical and are not touched by other objects.
•Volume setting too low — turn it up.
9
