TroubleShooting
DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the operator’s authority to operate the equipment.
Most problems have a simple solution. First, check that:
•Power is turned ON for both units
•Both units are plugged in (or batteries are fresh in Parent Unit)
•Electrical outlet works
•Volume is turned up on Parent Unit
•Parent Unit is in range of the Nursery Unit
No Sound
•Battery dead or weak — replace or use AC adapter.
•AC adapter not properly connected — check the connections.
•Nursery Unit covered or blocked — remove the obstruction.
Weak Sound
•Nursery Unit too far from baby — move closer.
•Large objects blocking the signal — try repositioning Nursery Unit.
•Volume setting too low — turn it up.
Static
•Interference from other electrical equipment — eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights, light dimmers, etc.)
•Parent Unit too far from Nursery Unit — move them closer.
•Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings & buildings. Try moving the Nursery Unit to another part of the room.
•Change channel on Nursery Unit.
Shrill Sound (Feedback)
•Nursery Unit and Parent Unit too close together — move them farther apart.
•Volume set too high — lower the volume.
6
