,OWO"ATTERYY)NDICATION
Parent Unit
ss)F OPERATED TOOOLONG ON AALOWOBATTERY YOUOMAYAALSO EXPERIENCEEAAPOOR SIGNAL ANDNTHEH BOTTOM 3OUNDU,IGHTGTURNSRRED
ss9OU MAYAEITHER TURN OFFFTHEHUNIT IPLUG IN THEH!#ADAPTERPOR REPLACELTHEHBATTERIES
/UTUOF 2ANGEN)NDICATION
ss)F THEH0ARENT 5NIT BEGINS TO LOSE THEHSIGNAL FROM THEH.URSERY 5NIT YOUOMAYA hear static or other noise. Immediately move the Parent Unit closer to the Nursery Unit to regain connection.
.OTE )T IS NOTOUNCOMMON FOROTHEH0ARENT 5NIT TO OCCASIONALLYY LOSE ANDNREGAIN CONNECTION WITH THEH.URSERYY5NIT IN ENVIRONMENTS THAT HAVE AASIGNIFICANTFAMOUNT OF OBSTRUCTIONS
3ETTINGT5P THEH"ABY -ONITOR
1.For optimum operation, it is best to use new batteries in the Parent Unit.
2.Place the Nursery Unit within 10 feet (3 meters) of your baby. Plug an AC adapter into the jack on the side of the Nursery Unit. Plug it into a working 120 volt AC outlet.
3.Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission.
4.Set both the Nursery Unit and Parent Unit to the same channel, “A” or “B” (“X” or h9v
5.Turn on the Nursery Unit using the On/Off switch on the side. The green power light should come on.
6.Place the Parent Unit within five (5) feet (1.5 meters) of the Nursery Unit and turn on the Parent Unit using the On/Off switch on the side of the unit. The green power light should come on.
7.If you have 2 Parent Units, repeat same
9OURUMONITORIIS NOWOREADYAFOROUSE
4ESTING THEH3YSTEM
)T IS
1.If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the other speaks into the Nursery Unit.
2.If only one adult is available, place a ticking clock, radio, or other
3.When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly.
4.If there is sound interference, switch the Nursery Unit and the Parent Units to the other channel setting.
4
