Hydraulic Return Line
• For Viscount I Plus motors, the hydraulic outlet on the motor is 7/8 in., 37° flare. Use a mini- mum 5/8 in. (16 mm) ID hydraulic return line
(J).
•For Viscount II motors, use a minimum 22 mm (7/8 in.) ID return line (J). The motor has a 1 in. npt(f) hydraulic oil return fitting.
•Return line shutoff valve (R): isolates the motor when servicing the system.
CAUTION
To avoid damage to the pump, never use the return line shutoff valve to control the hydraulic flow. Do not install any flow control devices on the hydraulic return line.
•Return fluid filter (J): removes residue from the hydraulic fluid to help keep the system running smoothly (10 micron size).
Installation
All Pumps
Fluid Line
•Fluid filter: with a 60 mesh (250 micron) stainless steel element to filter particles from the fluid as it leaves the pump.
•Fluid drain valve (U): required in your system, to relieve fluid pressure in the hose and gun.
•Fluid shutoff valve (D): shuts off fluid flow.
•Fluid pressure regulator: for more precise adjust- ment of the fluid pressure.
•Gun or valve: to dispense fluid.
•Fluid line swivel: for easier gun movement.
•Suction kit: enables the pump to draw fluid from a container.
•Inlet and outlet seals: prevent leakage in BSPP models. Order 193423 for
311211L | 9 |
