Graco 312497G important safety instructions Cycle Counters Part No, Cycle Switches, Part Numbers

Accessories

Cycle Counters - Part No.: 563444

The purpose of a cycle counter is to give assurance that the lubricant is flowing thru the system. Every “count” indi- cates one complete cycle of the divider valve. Visual inspection and/or recording of counts provides a constant check on the performance of your lubricant system and the pump. The Cycle Counter can be used on any MJ, MS, MH, MX and MXP divider valve assembly.

Cycle Switches

The function of a Cycle Switch is to electrically give assurance that the lubricant is flowing through the system. Actu- ated by a cycle pin, the switch can be wired to various controls.

NOTE: The cycle switch MUST be attached to a section that is equipped with a cycle indicator pin.

Part Numbers

Series Flo Divider Valves	MJ	MS/MH	MS (Nickel)	MX	MXP	MGO
Cycle Switch and Bracket Assembly	563272	563272	563272	563272	563272	563269
	Electrical Ratings: 15 amps at 125, 250 and 480 VAC; 1/2 amp at 125 VDC, 1/4
SPDT	amp at 250 VDC, 6.0 amp at 24 VDC Non-Inductive
Replacement Switch	557781	557781	557781	557781	557781	557781
Cycle Switch and Bracket Assembly	564357	564357	564537	564357	564537	NA
	Electrical Ratings: 10 amps at 125 or 250 VAC; 0.3 amp at 125 VDC or 0.15 amp
DPDT	at 250 VDC
Replacement Switch	NA	NA	NA	NA	NA	NA
Replacement Bracket for either	557546	557546	557546	557546	557546	560573
SPDT or DPDT Switch Assembly
Moisture Resistant Cycle Switch	563273	563273	563273	563273	563273	NA
with 6-foot Cable and Bracket
	Electrical Ratings: 5 amps at 125 or 250 VAC; Wire Code for Moisture Resistant
Assembly SPDT	Switch: BK (Com), Red (N.C), WH (N.O.), GN (Ground)
Replacement Switch with 6-foot	557782	557782	557782	557782	557782	NA
Cable

312497G 41