Step 9.
Assemble the toys on the tray as shown. The mirror, squeaker, and music button are already assembled.
| Mirror and music button— |
NOTE: Most toys may | DO NOT allow liquids |
be removed from tray | around music button. |
for cleaning or storage. |
|
Insert teether |
|
stalk into the tray. |
|
Squeaker |
|
(Note: |
|
Squeaker |
|
will not work |
|
in storage |
|
position.) |
|
Mount ring toys onto loop, then insert ends of loop into holes on tray. Short end of loop goes directly over leg. The loop and ring toys will not be removable.
Place tumbler into oval space as shown, then use two screws provided to attach it from underneath tray. DO NOT over- tighten screw.
Tighten screw until 
clicker does not
move 
NOT overtighten— 
then loosen screw 
slightly. 
Set duck pond in round space provided. Then place retainer ring over it, pushing all four tabs into slots in tray.
To Use the Seat Lock
Push gently on latch and turn the seat until latch engages in one of the four stop positions.
To allow seat to swivel again, pull lock out.
7
To Adjust the Seat Height
Do not adjust height while child is in activity center.
Step 1.
Press in the buttons on each leg to adjust seat to desired height. The bottom edge of the upper tubes must be even with one of the three lines on the lower leg tube.
For your child’s safety, all three legs must be set to the same height. Tray must be level.
8
