Dust and Debris Hazard, Equipment Misuse Hazard

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

DUST AND DEBRIS HAZARD

Use of this equipment to grind concrete and other paving materials can result in the release of potentially harmful dust or chemicals from the materials.

•For use only by sophisticated users familiar with applicable governmental safety and industrial hygiene regulations.

• Use equipment only in a well-ventilated area.

•Wear a properly fit-tested and government approved respirator suitable for the dust conditions.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not leave the work area while equipment is energized. Turn off all equipment when equipment is not in use.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

•Maintain a safe operating distance from other people in the work area.

•Avoid any pipes, columns, openings, or any other objects protruding from work surface.

MOVING VEHICLE HAZARD

Careless and reckless behavior causes accidents. Falling from vehicle, running into people or object, or being struck by other vehicles may result in serious injury or death.

•Do not step on forward/reverse pedals.

•Make turns slowly. Do not make turns greater than 45°.

•Loss of traction may occur going downhill. Do not operate on slopes greater than 15°.

•Do not carry passengers.

•Do not tow.

•Use with line striping equipment only.

•Use appropriate traffic control in all traffic areas. Refer to Manual on Uniform Traffic Control Devices (MUTCD), U.S. Department of Transportation, Federal Highway Administration or local highway and transportation regulations.

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

•Keep clear of moving parts.

•Do not operate equipment with protective guards or covers removed.

•Before checking, moving, or servicing equipment, disable power supply.

BURN HAZARD

Equipment surfaces that are heated can become very hot during operation. To avoid severe burns, do not touch hot equipment. Wait until equipment has cooled completely.

3A0101B

571004, 571003 specifications

Graco 571003 and 571004 are two exceptional models in Graco's line of airless paint sprayers, designed for both professionals and DIY enthusiasts who seek efficiency and superior finish quality in their painting projects.

The Graco 571003 is a robust unit engineered for small to medium-sized jobs, while the Graco 571004 caters to larger applications with its enhanced features and performance capabilities. Both units emphasize convenience, portability, and versatility, making them ideal for a variety of tasks, including interior and exterior painting, staining, and sealing projects.

One of the main features of both models is their ProXChange pump technology, which allows for quick and easy pump replacement on the job site, ensuring minimal downtime. The cordless designs enhance mobility, allowing users to move freely without being tethered to power outlets. The Graco 571003 boasts a compact design, making it easy to transport and store, while the 571004 provides a more powerful motor for extended applications, coming with a higher material flow rate.

Both models also incorporate a durable, easy-to-clean design. The reverse-a-clean feature helps quickly clear clogs in the spray tip, maintaining an uninterrupted workflow. The RAC X tip and guard system offers superior control over spray patterns, allowing for fine-tuning to achieve the desired finish without overspray.

In terms of technology, Graco has integrated a pressure control technology that allows users to adjust the pressure output to suit different materials and applications. This advancement means that both inexperienced painters and seasoned pros can use these sprayers confidently, ensuring an optimally smooth finish.

Additionally, the flexible suction tube allows users to spray directly from a bucket or other containers, making them versatile for various material types. They can handle a range of coatings, from thick latex paints to primers and stains, demonstrating their versatility on different surfaces, including wood, metal, and drywall.

In summary, the Graco 571003 and 571004 airless paint sprayers are designed for efficiency, offering unique features and innovative technology that simplify the painting process. With their durability, ease of use, and superior spraying performance, these models stand out in the competitive market of paint spraying equipment, making them ideal choices for a wide range of painting projects.

Graco 571003 Dust and Debris Hazard, Equipment Misuse Hazard, Moving Vehicle Hazard, Burn Hazard

Models: 571004 571003