6.3Installing the Infant Restraint/Base Using Vehicle Belt

You must carefully follow the instructions provided by your vehicle manufacturer, in addition to the information in this manual. Be sure you have read and understood section 5, “Infant Restraint Location” on p.21-26.

Make sure vehicle is on level ground so that

the level indicator, which is attached to the

 

infant restraint, can be used to properly

 

recline the infant restraint .

 

If a front passenger seat is used, slide the vehicle seat rearward as far as possible from the dashboard. If a rear seat is used, make sure the seat in front of it is moved forward enough and is upright enough to allow room for the infant restraint.

1.Remove infant restraint from base, regardless of whether or not you plan on using the base.

2.Place the base or infant restraint without base in a rear-facing position in a forward-facing vehicle seat.

34

Page 34
Image 34
Graco 8446L manual Installing the Infant Restraint/Base Using Vehicle Belt