Graco 8487, 8489 manual With or Without Built-in Harness, Locking clip provided with

Locking clip

With OR Without Built-in

Harness

•Combination Lap/Shoulder Belt with Locking Latch Plate

Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the car seat.

•Combination Lap/Shoulder Belt with Sliding Latch Plate

This belt has a latchplate that slides freely along the belt.

WITH Built-in harness: This belt MUST be converted to prevent movement of the lap portion of the belt. You must use

the locking clip provided with the

car seat, unless your vehicle's seat belt can be converted in another way as described in your vehicle owner's manual.

WITHOUT Built-in harness: Conversion or locking clip are not needed.

15