InstallationOperation
Topics Covered in this Chapter
♦Manual Applications
♦Automatic Appliations
♦Air Requirements
Note
Read this manual thoroughly before installing sealant gun.
Inspect sealant gun for shipping damage. If damaged, notify the carrier immediately.
Manual Applications
The palm and pistol grip sealant guns are used in
1.Secure gun in a way that allows proper routing of air hose and fitting.
2.Make sure gun does not impede movement of person.
3.Tighten hose connections before operating equipment. The
4.Do not exceed maximum working pressure of sealant gun.
Automatic Appliations
The palm grip and pistol grip sealant guns are not designed for use in high production operations. Never mount or secure any
Air Requirements
For information describing the air pressure requirements, refer to the technical data supplied with the sealant gun..
Topics Covered in this Chapter
♦
♦Manual Sealant Guns
♦Pressure Relief Procedure
Air-Powered Sealant Guns
The 950 Series,
The guns feature an interchangeable gun body and actuator with a fast change cartridge knob included. The cartridge retainers are
In operation, the dispense rate is controlled through air pressure, trigger position and nozzle orifice. When the gun is actuated, air pressure forces the plunger down, inside the cartridge, forcing material out the nozzle. When the trigger is released, pressure is removed and dispensing stops.
Manual Sealant Guns
The
Gun Tip/Nozzle Safety
Use extreme caution when cleaning or changing dispense sealant gun tips/nozzles. Always follow the Pressure Relief Procedure first, and then remove the spray tip/nozzle to clean it.
Never wipe off
4 | 309968D |