20
Changing Harness Strap Slots:
ALoosen harness straps:
Pull and hold upper belt tab.
Pull harness straps out.
BRemove both shoulder harness strap
loops from Splitter Plate on back of
child restraint.
CChange harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
child restraint.
It may be necessary to remove seat pad
from top of child restraint while relocating.
DRe-attach harness strap loops to Splitter
Plate:
5-Point Models (fig. e):
• For Infants or Small Toddlers:
Put Topright strap loop on Splitter
Plate first, then attach Topleft strap
loop.
NOTE: Make sure ends of straps are
behind Splitter Plate.
• For Toddlers:
Put Bottom right strap loop on Splitter
Plate first, then attach Bottom left
strap loop.
Overhead Shield Models (fig. f):
Put right strap loop on Splitter Plate
first, then attach left strap loop.
NOTE:
• Make sure both strap loops are securely
attached within Splitter Plate hook.
• Make sure straps are NOT twisted and
are routed behind stand (fig. g).
7
OPERATIONS and ADJUSTMENTS (continued)