CONNECTING THE GTM 11

E

What’s Included

 

• GTM 11 with LED and mini-USB plug

N

• Whip antenna (stiff antenna)

• Wire antenna (flexible wire antenna)

 

 

• Hook-and-loop fasteners

• Double-sided tape

Step 1: Snap the antenna on the GTM 11

You can use either the whip or wire antenna for your GTM 11. Use the traditional whip antenna for most installations. If you want to completely hide your GTM 11, use the wire antenna. Also, use the wire antenna if the whip antenna does not get an adequate signal strength.

1. Align the tab on the antenna with the front of the GTM 11.

GTM 11

Antenna Tab

LED

2.Snap the antenna onto the connector on the GTM 11. The antenna clicks indicating it is locked in place. You might have to wiggle it a bit to properly get it to click.

To remove the antenna from the GTM 11, press the antenna connector’s tab. Pull the antenna off the GTM 11.

Step 2: Connect the GTM 11 to your GPS device

Connect the mini-USB plug on the GTM 11 cable into the mini-USB connector on your Garmin GPS device.

mini-USB plug

Step 3: Connect your Garmin GPS to external power

Connect your GPS device to external power. Turn the GPS device on, if it does not turn on automatically.

NOTE: When using the GTM 11, your Garmin GPS device must be connected to external power.

EN-2

GTM 11 Owner’s Manual