30
6.1.1 3-Point Harness
1. Fromback, push harness anchor
buckle back through harness slot.
If necessary,from front, use harness
strap to pull buckle from slot .
2. Reinsertharness anchor buckle in the
appropriate slot .
3. Fromback, remove harness strap from
harness tightener.If necessary, from front,
use harness strap to pull strap from slot.
4. Reinsertstrap in the appropriate slot. Thread
strap through tightener exactly as shown .
5. SAFETYCHECK:
a) CHECK that straps are not twisted;
b) CHECK that straps are secure: pull on
harness straps from front.
c) CHECK that harness anchor buckle is
snapped flat against back as shown .
Harness
tightener
Harnessanchor
buckle