Graco ISPC099BA instruction manual Latch Belt Routing, Latch belt. fig

Models: ISPC099BA

1 92
Download 92 pages 56.95 Kb
Page 24
Image 24

OPERATIONS and ADJUSTMENTS (continued)

8LATCHBeltRouting:

LATCH belt MUST be routed through

the proper openings depending on direction of child restraint use.

A Remove pad from front of seat area by pulling out 2-button clips on lower front edge of child restraint (fig. h) and 2-button clip in center of seat.

Removing pad will expose the rotating

LATCH belt. (fig. i)

BRotate LATCH belt so that the belt routes through the proper openings (Pg 23, fig. k and fig. l). Belts must remain flat and tight against the child restraint BEFORE reattaching the three seat pad

2-button clips. (fig. j) LATCH belt must not interfere with the harness.

CRe-attach pad to child restraint by snapping the three 2-button clips back in place. DO NOT allow 2-button clip to interfere with the LATCH belt or vehicle seat belt.

(fig. h)

(fig. i)

Rotating LATCH Belt

(under seat pad)

Belt must be flat and tight

(fig. j)

22

Page 24
Image 24
Graco ISPC099BA instruction manual Latch Belt Routing, Latch belt. fig