8.1 Storing LATCH and Tether
1. For ease of storing, extend LATCH to its maximum length.
2. Locate the storage bar on
back of child restraint ➊.
3. Fasten LATCH connectors
to storage bar as shown.
4. After fastening to storage bar, pull on adjustment belt to make sure LATCH is securely fastened.
5. Fasten tether clip to storage bar and tighten strap.
6. LATCH and tether storage should look like this when
complete ➊.
➊
Tether Storage bar
LATCH
Storage bar
8.2 Airplane Use
This restraint is certified for use in Motor Vehicles and Aircraft
Important points to remember
1. Airlines have some restrictions about the use of child restraints.
2. Install your child restraint on an airplane in the same way it is installed in an automobile with a lap belt using recline position 2. (see Section 7.1, With a Vehicle Lap Only Belt, pp.
3. Check that the airplane seat belt holds the child restraint securely in place at all times.
