Graco Model Type 7479 Cleaning and Maintenance, To Remove and Wash Infant Restraint PAD, follow

7.3 Cleaning and Maintenance

￿TO REMOVE AND WASH INFANT RESTRAINT PAD, follow

instructions in “6.1 Positioning Harness Straps”, p. 27-30.	
On 5-point harness models,
push aside the small tab that
holds the anchor buckles in
place  and pull the anchor
buckles out of their indentations.
Push a corner of each anchor
buckle back into its slot .

Carefully remove the seat pad. Machine wash on delicate cycle and drip-dry. DO NOT USE BLEACH.

Reverse steps to reinstall seat pad. Check that harness system is not twisted, and pull on harness system to be sure harness is securely reinstalled.

￿INFANT RESTRAINT METAL AND PLASTIC PARTS may be cleaned by wiping with a mild soap and water solution. DO NOT USE BLEACH. Use of bleach may weaken plastic parts.

￿HARNESS STRAPS may be spot cleaned or replaced. DO NOT IMMERSE THE HARNESS STRAPS IN WATER. Doing so may weaken the harness straps.

￿BUCKLE may be cleaned with a damp cloth.

￿DO NOT LUBRICATE the buckle.

￿DO NOT USE INFANT RESTRAINT without seat pad.

43