Graco 1773713, PD117812A, 65, 1756269 Seat BACK, Cushionhwhilentightening Vehicle Seatt belt fig. d

FORWARD-FACING INSTALLATION WITH VEHICLE SEAT BELTS

WARNING

LATCH belts MUST be stored when using vehicle seat belt to install child restraint.

1Store Rear Facing and Forward Facing LATCH belt as shown. (fig. a).

Adjust car seat to upright position

Flip recline feet out for forward facing use (fig. b).

2Place forward-facingON VEHICLE SEAT

3LIDEICHILD RESTRAINTDBACK UNTIL THE RESTRAINTRIS INNCONTACTSWITH THE VEHICLE

SEAT BACK

34HREAD VEHICLE SEATHBELT THROUGH OPENINGS AND BUCKLEABELT (fig. c).

40RESSEDOWN lRMLY INNCENTER OFLCHILD RESTRAINTRTO COMPRESSTVEHICLEOSEAT

CUSHIONHWHILENTIGHTENING VEHICLE SEATT belt (fig. d).

50ULL FRONT TORBACK AND LEFT TO RIGHT ATA BELT PATH TO CHECK FOR SECUREH installation (fig. e). Vehicle lap belt

MUST stay tight. If not secure, see h6EHICLE 3EATE"ELTSv PG  E

6!TTACH TETHER STRAPTHOOK (A) to anchor hardware (B) and tighten adjustment

BELT TOTREMOVE ANY SLACK (fig. f) . If

VEHICLEIDOES NOT HAVEEANCHOR POINTSHTO ATTACH TETHER HOOKTTETHER HOOKOSHOULD BE STORED SEE h4ETHERH3TORAGEv page 47. Belt must lay flat and not be twisted.

0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELY INSTALLEDIADJUST IFLNECESSARY

22

4OOREMOVE LATCHSEE h2EMOVING LATCH FROM 6EHICLE !NCHOR 0OINTSv PR