REAR-FACING
REAR-FACINGAdjust child restraint to recline position (fig. a). Flip recline feet under child restraint for rear facing use.
Place
&OROEASE OFAINSTALLATION IEXTEND LATCH belt
TO ITS MAXIMUM LENGTH
(OOK CONNECTORSNTO VEHICLE LOWER ANCHORS
(fig. b). Belt must lay flat and not be twisted. Pull connectors to be sure they are securely attached to the anchor points. (fig. c).
#HECK#THAT THE LOWER ANCHORTBELT STAYS TIGHT and does not slip from the tightened position. If
IT DOESTNOTDSTAY TIGHT OTRYYANOTHEROSEATINGR POSITION ORICONTACTN#USTOMER 3ERVICE
#HECK#LEVELCINDICATORVON CHILD RESTRAINT (fig. f).
Vehicle must BEBON LEVEL GROUNDVANDLCHILDRIN U CHILDCRESTRAINT WHEN CHECKINGILEVEL INDICATOR
Ball MUST be entirely in green zone (fig. f). If
NECESSARY PLACELROLLED TOWELSLUNDERDCHILDO RESTRAINT ATRVEHICLETSEAT CREASE UNTIL ENTIRE BALL A IS INIGREENIZONEG 4HENERECHECK LEVEL INDICATOR
DO NOT use tether
0RESSEDOWN lRMLY INNCENTER OFLCHILDIRESTRAINTN 
while pulling LATCH adjustment belt. (fig. d).
0ULL FRONT TORBACK AND LEFT TO RIGHT ATABELT PATH 
TO CHECK FOR SECUREFINSTALLATION (fig. e).
0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELYH INSTALLED AND PROPERLYALEVELED ADJUSTDIF NECESSARY
4OOREMOVE LATCH SEE h2EMOVING LATCH from 6EHICLE !NCHOR 0OINTSv PR
16
