![](/images/new-backgrounds/1245049/245049151x1.webp)
A. Push the harness adjustment button under the seat flap. Pull the shoulder straps out to loosen the harness .
B. From behind seat, remove the ends of the two shoulder straps from the metal junction plate .
C. From front, pull straps through the harness slots and then reinsert them through the appropriate slots. Both harness straps must be through the same set of slots in the seat and pad.
D. Depending on the size of your child, you may need to adjust the harness straps as shown on page 37.
Reassemble the strap ends onto the metal junction plate .
5.SAFETY CHECK:
a)CHECK that straps are not twisted in front or back;
b)CHECK that straps are secure by pulling on harness straps from the front of the seat.
36
Harness adjustment
button
Metal junction
plate