18.3Adjusting Head Support/ Harness Straps

Failure to properly adjust the harness

straps for your child

increases the risk of serious injury or death in the event of a sharp turn, sudden stop or crash.

tBEFORE adjusting the head support height, have your child lean forward slightly.

t4RVFF[FUIFSFEBEKVTUNFOUIBOEMFA on top of seat and pull head support up until it snaps into one of the 6 height positions.

t5PMPXFSTRVFF[FSFEBEKVTUNFOUIBOEMF and push head support down.

tCHECK to make sure it is securely snapped into one of the 6 height positions by pulling up on head support.

When using in rear-facingmode always use one of the bottom 3 height positions B.

When using in forward-facingmode always use one of the top 4 height positions B.

Refer to page 50 for harness strap

placement.51

A

B

Page 51
Image 51
Graco PD238744A owner manual Adjusting Head Support/ Harness Straps