5.To create a secure installation, while pushing down on the base, pull the free end of the lap belt or the shoulder portion of the lap/shoulder belt to tighten .
6.Close
|
NEVER allow any object other than the vehicle |
| |
belts to go under or interfere with the |
| |
If any other part of the vehicle belt interferes |
| |
with the |
| |
MAKE SURE that you push the top of the |
| |
| ||
7. Check that belt does not move by pulling |
| |
and pushing hard on base with hands near the |
| |
vehicle belt path. If belt loosens | | |
or lengthens, repeat procedure. | ||
8. Push the infant restraint down into the base and |
| |
make sure that you hear a “click” . Pull up on |
| |
the infant restraint to be sure it |
| |
is latched securely into the base. | | |
If the infant restraint does not securely latch | ||
| ||
into the base, the infant restraint provides NO |
| |
protection for your child. DO NOT use the infant |
| |
restraint/base if the infant restraint does not |
| |
securely latch into the base. |
|
9. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” page 42.
29
