Graco Seat/Booster Seat manual Belt must lay flat and not be twisted, Never put two Latch

6.2.2 With LATCH

1.For ease of installation, extend LATCH to its maximum length.

2.Place the car seat firmly

against the back of a forward-facing vehicle seat.

3. Thread LATCH through the belt path normally used for the vehicle seat belt Ê.

Belt must lay flat and not be twisted.

4.Hook LATCH

Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached Ë.

5.Tighten LATCH by pushing down hard on

car seat and pulling the adjustment belt Ì.

6.NEVER put two LATCH

connectors on one vehicle LATCH anchor unless specifically allowed by the manufacturer Í.

Ê

Ë

Ì

Í

24