Graco Inc 235-463, 236-531, 237-695, 238-966, 308-236, Series D Technical, Data, Manual, Change Summary

14 308-236

Technical Data

Category Data

Maximum

fluid working pressure

5000 psi (345 bar)

Fluid orifice size

Model 235–462:

0.037 in. (0.94 mm)

All other models:

0.090 in. (2.3 mm)

etted parts

Stainless steel, Polyethylene, Polyurethane, Nylon, PTFE



Weight

18 oz (510 g)

Inlet 1/4 npsm(m)

Maximum material temperature

120F (50C)

* Sound pressure level

78 dBa

* Sound power level 87 dBa

* Measured while spraying waterbase paint – gravity 1.36 through a 517 tip at 3000 psi (207 bar) per ISO 3744.

TPTFE

is a registered trademark of the DuPont Co.

Manual Change Summary

Updated

manual per ECO F5413.

Contents

Main 308236 Silver MINNEAPOLIS, MN GRACO INC. P.O. BOX 1441 INSTRUCTIONS-PARTS Rev. J Supersedes Rev. H Table of Contents Symbols Warning Symbol Caution Symbol INJECTION HAZARD P MOVING ARTS HAZARD RECOIL HAZARD FIRE AND EXPLOSION HAZARD TOXIC FLUID HAZARD Pressure Relief Procedure If you suspect that the spray tip or hose is completely very slowly after following the steps above, clogged, or that pressure has not been fully relieved How to Use the Gun How to Adjust the Spray Pattern How to Clean the Spray Tip and Clear a Spray Tip Obstruction How to Check the Gun Diffuser Operation does not is not How to Flush the Gun Service Needle Replacement 8 2a* 2b* 12 10 Service 10 6 8 2a* 2b* 12 Parts Includes items 2 to 15. Parts Includes items 2 to 18. Replacement Danger and W 235475, which may be purchased separately 235474, which may be purchased separately Accessories FILTERS psi (210 bar) Maximum Working Pressure. SWIVELS and WHIP HOSES TOOLS Technical Data Manual All other models: Model 235462: Page Graco W MINNEAPOLIS, MN GRACO INC. P.O. BOX 1441 All Graco W ADDITIONAL LIMITATION 16 308-236

Graco Inc Technical, Data, Manual, Change Summary

Models: 235-463 236-531 237-695 238-966 308-236 Series D

Model 235–462:

All other models: