Graco Inc 308-425, 237-296 dimensions List of Models, Symbols

Models: 308-425 237-296

1 20
Download 20 pages 23.06 Kb
Page 2
Image 2

List of Models

 

 

 

 

Maximum Fluid

Maximum Air

Part No.

Series

Pump Model

Ratio

Working Pressure

Input Pressure

236–477

B

Kingt

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

 

 

 

 

 

 

237–296

B

Kingt, with hose and gun

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

 

 

 

 

 

 

237–281

B

Kingt, with surge tank

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

 

 

 

 

 

 

237–285

B

Reduced Icing Quiet

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

 

 

Kingt

 

 

 

 

 

 

 

 

 

238–906

B

Reduced Icing Quiet

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

 

 

Kingt, with hose and gun

 

 

 

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

INSTRUCTIONS

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 18 for the maximum working pressure of this equipment.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DDo not use hoses to pull equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

DWear hearing protection when operating this equipment.

DDo not lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.



Page 2
Image 2
Graco Inc 308-425, 237-296 dimensions List of Models, Symbols