This manual contains IMPORTANT
INSTRUCTIONS and WARNINGS.
READ AND RETAIN FOR REFERENCE.
SPRAY GUN EXTENSION
4050 psi (280 bar) MAXIMUM WORKING PRESSURE
Model 223±390 12 in. (305 mm) long
Model 223±391 18 in. (457 mm) long
Model 223±392 24 in. (610 mm) long
Fits all Graco high pressure spray guns. (Adapters available for other guns)
Includes DripLess Tip Guard.
Order spray tip separately.
308±011
Rev A
GUN NOT INCLUDED
WARNING
Pressure Relief Procedure
To reduce the risk of serious bodily injury, including fluid injection, splashing fluid or solvent in the eyes or on the skin, or injury from moving parts or electric shock, follow this procedure whenever you shut off the sprayer, when checking or servicing any part of the spray system, when installing, cleaning or chang- ing spray tips, and whenever you stop spraying.
1.Engage the gun safety latch.
2.Shut off the pump and unplug it (or disconnect the spark plug).
3.Disengage the gun safety latch. Hold metal spray extension firmly to the side of a grounded metal pail, and trigger the gun to relieve pressure.
4.Engage the gun safety latch.
5.Open the sprayer's pressure drain valve, having a container ready to catch the drainage. Leave the valve open until you are ready to spray again.
If you suspect that the spray tip or hose is com- pletely clogged, or that pressure has not been fully relieved after following the steps above, VERY SLOWLY loosen the tip retainer nut or hose end cou- pling to relieve pressure gradually, then loosen com- pletely. Now clear the tip or hose.
WARNING
Hazard of Using Fluids Containing Halogenated Hydrocarbons
Never use 1,1, 1±trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids con- taining such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibil- ity of explosion, which could cause death, serious bodily injury and/or substantial property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440±1441
COPYRIGHT 1990, GRACO INC.
