309412 11
Engine
Removal
1. Remove Pinion Assembly/Rotor/Field /Pinion/
Clutch, Clamp and Clutch Housing,asin-
structed in manual 309890.
2. Fig. 6. Disconnect all necessary wiring.
3. Fig. 7. Remove two locknuts (7) and screws (6)
from base of engine.
4. Lift engine carefully and place on work bench.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
Fig. 6
Green
1
2
Tothe field
Tothe engine
7
97
2
1
ti1835
Fig. 7
7
6
8710B
Installation
1. Lift engine carefully and place on cart.
2. Fig. 7. Install two screws (6) in base of engine and
secure with locknuts (7). Torque to 200 in-lb (22.6
NSm).
3. Fig. 6. Connect all necessary wiring.
4. Install Pinion Assembly/Rotor/Fi eld/Pinion/
Clutch, Clamp and Clutch Housing,as
instructed in manual 309890.