Engine
310778N 11
Engine
Removal

NOTE: All service to the engine must be performed by

an authorized HONDA dealer.

1. Do Fan Belt, Removal; page 10.
2. Fig. 4. Loosen motor knob (55). Swing motor retainer
bracket (105) out.
3. Remove engine (119) and rocker plate (99) from sprayer.
4. Remove four screws (23), washers (7) and nuts (24) and
remove rocker plate (99), dampeners (153) and washers
(154) from engine (119).
Installation
1. Install rocker plate (99), dampeners (153) and washers
(154) on engine (119) with four screws (23), washers (7)
and nuts (24); torque to 125 in-lb (14.1 N·m).
2. Install engine and rocker plate (99) on sprayer.
3. Swing motor retainer bracket (105) in. Tighten motor knob
(55).
4. Do Fan Belt, Installation; page 10.

FIG. 4

WARNIN G
Relieve pressure; page 6.
ti5407a
23
154
99
154
153
119
7
24
55 105