INSTALLATION

Check the Electrical Grounding (See Fig 7 )

WARNING

Proper electrical grounding of every part of your system is essential. For your safety , read the warning section, FIRE, EXPLOSION, OR ELECTROSTATIC SHOCK HAZARD , on page

3.Ground the system as explained there. Then check your system as explained below.

1.Completely turn off the air and fluid supplies to the gun.

2.Have a qualified electrician check the electrical grounding continuity of the spray gun and air hose.

a.With the electrically conductive air hose con- nected and properly grounded, use a

megohmmeter to measure the resistance between the gun manifold and a true earth ground. Use an applied voltage of 500 minimum to 1000 volts maximum.

True Earth

 

 

Megohmmeter

 

 

See ACCESSORIES to order

Ground

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Grounded

Air Hose

b. If the resistance is greater than 2

megohms*,

check the tightness of the ground

connections,

Gun Manifold

and be sure the air supply hose ground wire is connected to a true earth ground. If the resis- tance is still greater than 2 megohms*, replace the air supply hose.

*If you are using the red colored hose, resis- tance should not exceed 100 ohms.

Fig 7

0436

Install the Fabric Cover (See Fig 8 )

1.Install a fabric cover over the front of the gun and slide it back to cover the exposed tubing and hoses at the back of the manifold. See ACCESSORIES sec- tion.

Fabric Cover

Slit

Exhaust Tubes

0437

2.Cut a small slit in the cover and route the two exhaust tubes outside the robot arm or reciprocator. This en- ables you to monitor the exhaust tubes for the pres- ence of any paint or solvent. See Check for Fluid Leakage on page 12. Strap down the exhaust tubes to prevent them from moving around.

Exhaust Tubes

0438

Fig 8

83￿8￿￿84

Page 7 Page 9
Page 8
Image 8
Graco Inc 235893, 4600SC, 308-084, 235-894, 224-224 Check the Electrical Grounding See Fig, Install the Fabric Cover See Fig
Page 7 Page 9

308-084, 4600SC, 224-094, 235-894, 235893 specifications

Graco Inc. is a renowned company in the manufacturing of fluid handling systems and products, particularly focusing on industrial, automotive, and contractors' markets. Among its extensive range of offerings are specific models that have garnered attention for their performance and reliability. This article highlights several Graco product numbers, including 224-224, 235893, 235-894, 224-094, and 4600SC.

The model 224-224 is recognized for its versatile usage in paint applications, capable of accommodating various material types. It is equipped with Graco's innovative technology that ensures consistent and precise fluid delivery, making it ideal for both professional contractors and DIY enthusiasts. The device often includes features like a lightweight structure for easy maneuverability and an ergonomic design for enhanced user comfort.

Moving to the model 235893, it presents impressive durability and optimal performance in high-pressure scenarios. This model is particularly popular among heavy-duty applications, thanks to its ability to withstand the rigors of demanding environments. With advanced component engineering, the 235893 ensures minimal downtime and enhances efficiency, making it a go-to choice for professionals in need of reliability under pressure.

The 235-894 model stands out due to its unique pump design that optimizes material flow and reduces overspray. This characteristic is crucial for achieving professional-grade finishes with reduced waste, saving both time and resources. Additionally, its user-friendly interface allows operators to adjust settings easily, catering to varied application needs.

Next, the 224-094 model is tailored for precision and versatility, featuring a compact design suitable for tighter spaces. It is engineered for efficiency, allowing for rapid color changes without compromising performance. The advanced filtration system integrated within this model ensures that contaminants are minimized, safeguarding the integrity of the materials being used.

Lastly, the 4600SC model exemplifies Graco’s commitment to innovation, specifically tailored for airless spray applications. It is equipped with cutting-edge technology that maximizes control over pressure and flow rate, allowing for seamless operation in different environments. The model’s ability to adapt to various paints and coatings while providing a superior finish adds to its appeal.

In summary, Graco Inc. provides a range of high-performance products like the 224-224, 235893, 235-894, 224-094, and 4600SC, each with distinctive features and technologies that cater to a broad spectrum of fluid handling needs. These models reflect the company’s dedication to enhancing efficiency, durability, and user experience in fluid management across various industries.
Top Page Image Contents