Manuals / Graco Inc / Lawn and Garden / Pressure Washer

Graco Inc 800-268, 800-093, 308-518, 826, 1235 manual Valves, Pumping Section, Servicing Plungers

Models: 308-518 826 800-093 1235 800-268

1 24
Download 24 pages 12.12 Kb
Page 10
Image 10

To reduce the risk of serious bodily injury, including fluid injection, splashing in the eyes or

NOTE: The following metric wrenches are needed: MlO, Ml3 and M30. Repair kits are available. Refer to the individual repair sections and the pump parts page for more details. For the best results, use all parts in the kits.

NOTE: There are two different tool kits to aid in servicing the pump. P/N 800-298 is used to ease installation of packings. P/N 800-271 includes the items in 800-298 and tools to aid in the removal of packing retainers.

Valves

NOTE: For a set of six valves, order P/N 801-472.

1.Remove the hex plug from the manifold using an M30 wrench.

2.Examine the o-ring under the hex plug and replace it if it is cut or distorted.

3.Remove the valve assembly from the cavity; the assembly may come apart.

4.Install the new valve. Install the o-ring and hex plug; torque to 75 fl-lb (103 Nm).

NOTE: Retorque the plug after 5 hours of operation.

Pumping Section

1.Remove the eight capscrews and Iockwashersfrom the manifold using an Ml 3 wrench.

2.Carefully separate the manifold from the crankcase.

NOTE: It may be necessary to tap the manifold lightly with a soft mallet to loosen.

1.Loosen the plunger retaining screw five to six turns, using an Ml 0 wrench. Push the plunger towards the crankcase to separate the plunger and retaining screw.

2.Remove the screw from the plunger and examine the o-ring, backup ring and copper bearing/gasket washer. Replace these parts if necessary using kit 801-474.

3.Remove the plunger and flinger from the plunger shaft. Clean, examine and replace parts as necessary.

4.Inspect the plunger shaft for oil leakage from the crankcase. If leaking is obvious, replace the oil seals. Otherwise, DO NOT remove these seals as they cannot be reused. An oil seal kit is available to replace the seals.

5.Lightly grease the oil seal, if it is being replaced, and the flinger and replace them on the plunger shaft. Then install the plunger.

6.Lightly grease the retaining screw and the outer end of the plunger. Place the washer, o-ring and backup ring around the screw and install the screw through the plunger. Torque to 14.4 ft-lb (19.5 Nm).

NOTE: If you plan to replace the packings, refer to Servicing the V-Packings.

7.Lubricate the outside of each plunger. Slide the manifold onto the crankcase, being careful not to damage the seals.

8.Install the capscrews and washers finger-tight. Torque the screws to 21.7ft-lb (29 Nm) following the tightening pattern (Figure 4). Uneven tightening may cause the manifold to bind or jam.

IKeep the manifoldCAUT’oNproperly aligned1 with the ceramic plungers when removing to avoid

damage to the plunger or seals.

3.Carefully examine each plunger for any scoring or cracking and replace as necessary,

Servicing the

Plungers

 

 

NOTE: Plunger repair kit, P/N 801-474 is available to

 

replace retainers, o-rings,

washers and

Figure 4

backup

rings for three cylinders.

1-O 308-518

Page 9 Page 11
Page 10
Image 10
Graco Inc 800-268, 800-093, 308-518, 826, 1235 manual Valves, Pumping Section, Servicing Plungers
Page 9 Page 11

308-518, 826, 800-093, 1235, 800-268 specifications

Graco Inc is a leading manufacturer of fluid handling systems and products, renowned for its innovative technologies and a wide range of applications across industries. Headquartered in Minneapolis, Minnesota, Graco has established a reputation for producing high-quality equipment designed to handle, apply, and manage fluids with precision and efficiency.

One of the key features of Graco's product lineup is its extensive array of pumps. These pumps come in various configurations, including air-operated, electric, and hydraulic versions, ensuring that they can meet the diverse needs of various applications. This versatility allows Graco to service industries such as automotive, construction, and manufacturing, where fluid handling is critical.

Graco is also at the forefront of technology integration. Their products often feature advanced electronic controls that enhance operability and efficiency. For example, some of their spray equipment is equipped with intelligent technology that provides real-time feedback and monitoring, which helps users optimize their processes and improve overall productivity.

In addition to pumps, Graco offers a comprehensive range of accessories, including hoses, fittings, and filters, which are essential for maintaining system performance. Their commitment to quality means that these components are robust and designed to withstand the rigors of high-pressure and high-demand environments.

Another notable characteristic of Graco products is their emphasis on safety. The company designs its equipment with user safety in mind, incorporating features such as anti-static technology and ergonomic designs to reduce fatigue during operation. This focus on safety ensures that users can operate equipment with confidence while minimizing the risk of accidents.

Graco's dedication to sustainability is also evident in its product offerings. Many of their systems are designed to reduce waste and improve efficiency, aligning with modern environmental standards. This eco-friendly approach not only benefits the planet but also helps customers reduce operating costs.

In summary, Graco Inc excels in providing innovative fluid handling solutions that are characterized by versatility, advanced technology, safety features, and a commitment to sustainability. Whether it's for industrial applications or specialized tasks, Graco's comprehensive product range is designed to meet the highest standards of performance and reliability.