Accessories
311001G 33
Accessories
Use Only Genuine Graco Parts and Accessories
Air Fitting and Tubing Kit 249473
Alternative-style connector for air inlet and hose. 3/8 in.
to 1/4 npt(f) Push-To-Lock fitting, 25 ft (7.62 m) long, 3/8
in. (9.5 mm) ID, nylon tubing.
Air Hose 241811
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
1/4-18 npsm(fbe), 1/4 in. (6 mm) ID, 25 ft (7.62 m) long
polyurethane tubing.
Air Line Quick Disconnect
208536 Air Line Quick Disconnect Coupling
169967 Air Line Quick Disconnect Pin
Fluid Filter Kits
224453 100 mesh (.005 gap spacing) replacement
fluid filters. Quantity. of 5.
238563 60 mesh (.009 gap spacing) replacement
fluid filters for coarser particle filtering to
replace standard 100 mesh filters. Quan-
tity of 3.
Fluid Hose 241812
3500 psi (24 MPa, 242 bar) Maximum Working Pressure
1/4-18 npsm(fbe), 3/16 in. (5 mm) ID, 25 ft (7.62 m) long,
nylon tubing with polyurethane cover.
Fluid Swivel Connector 115898
5800 psi (40 MPa, 400 bar) Maximum Working Pressure
Connector to ease movement of the gun and fluid hose.
1/4-18 npsm. 17-4 PH SST wetted parts.
Gun Brush 101892
Use to clean the gun.
G15 Gun Flush Box Insert 15G093
Insert for use with Gun Flush Box 244105 and AA
Series G15 Spray Guns.
G40 Gun Flush Box Insert 15G346
Insert for use with Gun Flush Box 244105 and AA
Series G40 Spray Guns.
Gun Lubricant 111265
One 4 oz. (113 g) tube sanitary (non-silicone) lubricant
for fluid seals and wear areas.
High Pressure Fluid Ball Valve 238694
5000 psi (35 MPa, 350 bar) Maximum Working Pressure
3/8 npt(mbe). SST wetted parts, PEEK seats, PTFE
seals. Compatible with acid-catalyzed materials. Can be
used as fluid drain valve.
HVLP Verification Kit 249140
Use to check air cap air pressure at various air supply
air pressures. Do not use for actual spraying.
RAC Gasket 246453
Pack of five standard replacement RAC gaskets (item
33a).
Acetal RAC Gasket 248936
Pack of five plastic (acetal) replacement RAC gaskets
(item 33a).
G40 RAC Conversion Kit 287917
Kit includes parts to convert a standard G40 gun
(249242) to a RAC gun. LTX spray tip not included.
Air Cap Lacquer Kit 289080
Kit includes air cap optimized to spray lacquer.
Air Cap Seal Kit 253032
Pack of five seals and five o-rings for the air cap assy.
Seal Repair Kit 249422
Kit includes replacement o-rings, gasket, u-cup, air
valve assembly, and seal installation tool.
Plastic Seat Repair Kit 249424
Kit includes replacement plastic seat (pack of 10), and
seat nut for Model G15 gun.
SST Seat Repair Kit 287962
Kit includes assembled diffuser with SST seat for use
with pigmented acid catalyzed materials. For use with
gun 288844 only.
Carbide Seat Repair Kit 249456
Kit includes replacement carbide seat, seat gasket, and
seat nut for Model G40 gun. Kit also can be used with
Model G15 guns.
Carbide Seat Gasket Kit 288619
Kit includes replacement nylon seat gaskets (qty. of ten)
for Model G40 guns and G15 guns with a carbide seat.
Tip Filter Kit 241804
Replacement filters for spray tip orifice sizes 0.007,
0.009, and 0.011. Quantity of 10.
Trigger Repair Kit 249585
Kit includes replacement trigger, pivot pins (qty. of 5),
and pivot pin nuts (qty. of 5).
Trigger Stop Kit 249423
Kit includes replacement trigger stop and pin.
Ultimate Gun Cleaning Kit 15C161
Kit includes brushes and tools for gun maintenance.
Unclogging Needle Kit 249598
Kit includes picks for unclogging gun tip.
Fan Valve Fine Adjustment Kit 289499
Kit includes a replacement fan valve assembly with
more adjustment accuracy.
To be HVLP compliant, the atomizing air pressure
must not exceed 10 psi (70 kPa, 0.7 bar).