Safety Overload
sNOTICE: Do not exceed 30 minutes of continuous operation.
1.The motor of this device has a built-in thermal overload protector. Should the motor overheat, the protector will automatically shut off the motor. Should this occur, move the ON/OFF switch to the OFF position and allow the motor to cool down for approximately 30 minutes before turning it on again.
2.If the overload protector shuts off the motor frequently, you may have an unstable voltage situation.
3.If the device shuts down and cannot restart, it may need to be replaced. Call your Graham-Field authorized distributor immediately.
JB0112-070-INS-LAB-RevB14 | 13 |
