Grandstream Networks, Inc. GXV-3000 User Manual Page 19 of 46
Firmware 1.0.1.7 Updated: 06/2007
Time Display Format LCD time display in 12 hour or 24 hour format
Date Display Format Choose one of the following formats:
• Year-Month-Day
• Month-Day-Year
• Day-Month-Year
Display Clock instead of
Date
Default is No. Display the clock instead of Date. If set to “Yes”, it will show the clock.
LCD Screen Saver Start
Interval
Default value is 60 seconds- after 60 seconds the LCD Screen Saver is enabled. Screen
saver file limited to 20 images or 320kb. Change/update screen saver the same way as cus-
tomized ring tone.
LCD Screen Saver Refresh
Interval
Default is 10. This parameter controls the pictures showed on the LCD.
LCD Auto Power Off Inter-
val
Default value is 300 seconds - after 300 seconds of idle time the LCD will automatically
Power Off.
LCD Brightness Default value is 128
LCD Contrast Default value is 128
LCD Chroma Saturation Default value is 128
LCD Text Color Change the LCD font text color, adjust via sel ected numbers
LCD Background Color Select desired LCD Background color from the drop down box. Initial all is 0, can be adjusted
to the color designed
OSD Text Color Select desired On Screen Display Text color from drop down box. Default is white. The color
can distinguish OSD from video background
PIP Position Local Mirror Images showed via Picture in Picture positions in the LCD
Camera Zoom Mode Select desired camera zo om mode (Tele, optical, digital). Can adjust local video zoom either
in mirror mode or during the call (on the fly) by pressing the Left or Right Arrow Key
Camera Exposure Select desired Camera Exposure mode based on surroundings.
Camera Color Mode Select desired Camera Color Mode (Color or Monochromatic)
Camera White Balance Select desired Camera White Balance to be automatic or Fixed.
Camera Lens Correction Correct Camera Lens noise. Default is No. Recommend to set to YES to reduce camera lens
noise and improve video quality.
TV Output Select desired TV Output type (PAL or NTSC).
Check the device using the Device Status Configuration page.