Grandstream Networks HT286, HT486, HT488, HT496, HT386 3 Device Capabilities and Known Interoperability Issues

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER

3 Device Capabilities and Known Interoperability Issues

This section describes the features supported by the HT-286 / HT-386 / HT-486 / HT-488 /

HT-496 / BT-100, as well as BroadWorks interoperability issues and impact. The following

table describes capabilities.

Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks

version with a specific partner’s device under test (DUT) version.

Compatible Revisions indicates the maintenance versions that should interface properly

with BroadWorks.

3.1 Capabilities

Device Type SIP ATA

Lines and Appearances HT-286: 1 line 1 appearance per line

HT-386: 2 lines 1 appearance per line

HT-486: 1 line 1 appearance per line

HT-496: 2 lines 1 appearance per line

BT-100: 1 line 1 appearance per line

Speaker/Power/Bridge HT-286: No/No/Yes

HT-386: No/No/Yes

HT-486: No/No/Yes

HT-488: No/No/Yes

HT-496: No/No/Yes

BT-100: Yes/No/Yes

Indicates speaker phone, in-line power, device

bridge/conference.

Verified Revisions BroadWorks Release: 14.SP2

Grandstream HT-286: 1.1.0.8

Grandstream HT-386: 1.0.3.96

Grandstream HT-486: 1.1.0.8

Grandstream HT-488: 1.0.3.96

Grandstream HT-496: 1.0.3.96

Grandstream BT-100: 1.1.0.8

Compatible Revisions BroadWorks Release: 14.SP2

Grandstream HT-286: any maintenance version of

1.1.0.8

Grandstream HT-386: any maintenance version of

1.0.3.96

Grandstream HT-486: any maintenance version of