Grandstream Networks HT503 FXS/FXO SAVING THE CONFIGURATION CHANGES ,

SAVING THE CONFIGURATION CHANGES

Once a change is made, users should click on the “Update” button in the Configuration page. The HT503

will display a confirmation screen to confirm that the changes have been saved. Click ‘Reboot’ to save

all changes. Please reference the GUI pages using the following link:

http://www.grandstream.com/user_manuals/GUI/GUI_HT503.rar.

Remote Reboot of the HT503

The administrator can remotely reboot the HT503 by clicking on the “Reboot” button at the bottom of the

configuration page. Once done, the following screen will be displayed to indicate that rebooting is

underway. You can login again after about 30 seconds.

FIGURE 4: SCREENSHOT OF REBOOTING SCREEN

Grandstream Device Configuration

The device is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

NOTE: Interrupting the ‘booting up’ process could permanently damage the device.

Grandstream Networks, Inc. HT503 User Manual Page 31 of 35

Firmware 1.0.0.6 Last Updated: 6/2007