3.Put the frame pivot rod of the snowblower support in the front attachment brackets and fasten with the hitch pins as shown in figure 5.0-3.

1.Frame Pivot Rod

2.Front Attachment Bracket

3.Hitch Pin

4.Universal Joint Shaft

5.Universal Joint Tube Figure 5.0-3

4.Put the universal joint shaft into the universal joint tube and put the universal joint shaft on the drive shaft of the front drive kit as shown in figure 5.0-3.

5.Put the snowblower push rod on the snow- blower support and fasten with the hitch pin. Then put the front drive kit push rod in the snowblower push rod.

6.Put the front drive kit push rod pivot pin in the top hole in the attachment lift on the tractor and fasten with the hitch pin as shown in figure 5.0-4.

1.Front Drive Kit Push Rod

2.Snowblower Push Rod

3.Front Drive Kit Push Rod Pivot Pin

4.Hitch Pin

Figure 5.0-4