8/16-Port PS/2 KVM Switch

5. Operation & Usage

5.1 Set Password

At factory default the PS/2 KVM will not ask for password unless it is set by user. You may press “Scroll Lock” twice followed by “F2” to bring up password setting menu.

★NOTE：Before you are familiarized with this device, it is strongly recommended to use without password. If password is forgotten, please send PS/2 KVM to your distributor for factory reset.

5.2 Activate OSD

To switch port, you may enter OSD menu to select port, or, use Hot-Key to perform switching. To bring up OSD menu, please press “Scroll Lock” twice to activate OSD Main Menu as illustrated below<fig.1>.

OSD Main Menu

<fig.1>

11 / 26